Skip to main content

Full text of "MacBook Pro 15" Retina Display Mid 2012 Repair Manual"

See other formats


Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board 



/ffXft 



Installing MacBook Pro 15" 
Retina Display Mid 2012 I/O 

Board 

Written By: Brett Hartt 



SUMMARY 

Pre-req only 



©iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 3 



Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board 



Step 1 — I/O Board 




• Use the tip of a spudger to flip up the I/O board data cable lock and rotate it toward the 
battery side of the computer. 

• Use the flat end of a spudger to slide the I/O board data cable straight out of its socket on 
the logic board. 

• Do not lift up on the I/O board data cable, as its socket is very fragile. Pull the 
cable perpendicular to the face of the logic board. 



A 



Step 2 




♦ Remove the two 3.1 mm T5 Torx screws securing the I/O board to the logic board. 

• Carefully lift the I/O board and remove it from the lower case. 



©iFixit — CCBY-NC-SA 



www.iFixit.com 



Page 2 of 3 



Installing MacBook Pro 15" Retina Display Mid 2012 I/O Board 



To reassemble your device, follow these instructions in reverse order. 

This document was last generated on 2012-11-27 05:37:11 PM. 



© i Fixit — CC BY-NC-SA www.i Fixit.com Page 3 of 3